REASSEMBLY
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1.
INSTALL HEADLIGHT LEVELING MOTOR LH |
 |
- Insert the headlight leveling motor LH in the direction indicated by the arrow (1) in the illustration.
Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to connect the shaft.
Turn the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to install it.
| 2.
INSTALL CLEARANCE LIGHT BULB |
 |
- Turn the bulb in the direction indicated by the arrow to install it.
| 3.
INSTALL FRONT TURN SIGNAL LIGHT BULB |
 |
- Turn the bulb in the direction indicated by the arrow to install it.
| 4.
INSTALL NO. 2 HEADLIGHT BULB |
 |
- Turn the bulb in the direction indicated by the arrow to install it.
| 5.
INSTALL NO. 1 HEADLIGHT BULB |
 |
- Turn the bulb in the direction indicated by the arrow to install it.