2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT STOP LIGHT SWITCH

  1. A166137E02
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pin pushed
    10 kΩ higher
    Pin released
    Below 1 Ω
    3 - 4
    Pin pushed
    Below 1 Ω
    Pin released
    10 kΩ higher

    If the result is not as specified, there may be a malfunction in the stop light switch.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →