2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for LHD and RHD vehicles.
  2. The procedures listed below are for LHD vehicles.


1. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

B183763
  1. Detach the 8 claws and remove the opening cover.


2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

B180307E02
  1. Place protective tape as shown in the illustration.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the No. 3 instrument panel register.


3. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

B181944E02
  1. Place protective tape as shown in the illustration.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the No. 4 instrument panel register.


4. REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

B180653
  1. Detach the 10 claws.

  1. Disconnect the connector and remove the No. 1 center instrument cluster finish panel.


5. REMOVE CLOCK ASSEMBLY

  1. B179754
    Remove the 2 screws and clock.


6. REMOVE RADIO RECEIVER ASSEMBLY (w/o Multi-display)

  1. B181484
    Remove the 2 screws and 2 bolts.

  1. B183147
    Pull the radio receiver to detach the 10 claws on the backside of the radio receiver.

  1. Disconnect the connectors and remove the radio receiver.


7. REMOVE NO. 2 RADIO BRACKET (w/o Multi-display)

  1. B181486
    Remove the 3 bolts and bracket.


8. REMOVE NO. 1 RADIO BRACKET (w/o Multi-display)

  1. B181485
    Remove the 3 bolts and bracket.


9. REMOVE CLOCK ASSEMBLY (w/o Multi-display)

  1. B179753
    Remove the 2 screws and clock.

← COMPONENTS (from Sep 2011)REMOVAL (from Jan 2012) →