REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
| 1.
REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY
|
 |
Detach the 8 claws and remove the opening cover.
| 2.
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Place protective tape as shown in the illustration.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover, detach the 6 claws.
Disconnect the connector and remove the No. 3 instrument panel register.
| 3.
REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Place protective tape as shown in the illustration.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover, detach the 6 claws.
Disconnect the connector and remove the No. 4 instrument panel register.
| 4.
REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL
|
 |
Detach the 10 claws.
Disconnect the connector and remove the No. 1 center instrument cluster finish panel.
| 5.
REMOVE CLOCK ASSEMBLY |
 |
- Remove the 2 screws and clock.
| 6.
REMOVE RADIO RECEIVER ASSEMBLY (w/o Multi-display)
|
 |
- Remove the 2 screws and 2 bolts.
- Pull the radio receiver to detach the 10 claws on the backside of the radio receiver.
Disconnect the connectors and remove the radio receiver.
| 7.
REMOVE NO. 2 RADIO BRACKET (w/o Multi-display)
|
 |
- Remove the 3 bolts and bracket.
| 8.
REMOVE NO. 1 RADIO BRACKET (w/o Multi-display)
|
 |
- Remove the 3 bolts and bracket.
| 9.
REMOVE CLOCK ASSEMBLY (w/o Multi-display) |
 |
- Remove the 2 screws and clock.