2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Sep 2011

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE FRONT SEAT HEADREST ASSEMBLY
  1. Remove the front seat headrest assembly.


2. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER RH
  1. Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

  1. B292622
    Detach the 4 claws and remove the front seat outer track bracket cover RH.


3. REMOVE FRONT SEAT INNER TRACK BRACKET COVER RH

  1. B292623
    Detach the 4 claws and remove the front seat inner track bracket cover RH.


4. REMOVE FRONT SEAT OUTER TRACK COVER RH
  1. Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.

  1. B292624
    Detach the 2 claws and clip.

  1. Detach the 2 guides and remove the front seat outer track cover RH.


5. REMOVE FRONT SEAT INNER TRACK COVER RH

B292625
  1. Detach the 2 claws and clip.

  1. Detach the 2 guides and remove the front seat inner track cover RH.


6. REMOVE FRONT SEAT ASSEMBLY RH

  1. B292629
    Remove the 2 bolts.

  1. B292627
    Pull out the front seat lap type belt assembly through the hole of the front seat cushion.

  1. Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

  1. B292626
    Remove the 2 bolts.

  1. Operate the seat track adjusting handle and move the front seat assembly RH to the center position, and then operate the reclining adjusting handle and move the front seatback to the upright position.

  1. Remove the front seat assembly RH from the vehicle.

    NOTICE:
    Be careful not to damage the vehicle body.

← COMPONENTS (from Sep 2011)DISASSEMBLY (from Sep 2011) →