INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL FRONT POWER SEAT SWITCH LH |
![]() ![]() |
Install the switch with the 3 screws.
Connect the switch connector.
| 2. INSTALL FRONT SEAT CUSHION SHIELD LH |
for Driver Side:
Connect the connector.
Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.

Install the 3 screws.
Connect the 2 rubber bands.

Install the 2 screws.
| 3. INSTALL RECLINING POWER SEAT SWITCH KNOB |
![]() ![]() |
Attach the 2 claws to install the reclining power seat switch knob.
| 4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() ![]() |
Attach the 2 claws to install the slide and vertical power seat switch knob.
| 5. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat assembly (Click here).



