2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the LH side.


1. INSTALL FRONT POWER SEAT SWITCH LH

B180704
  1. Install the switch with the 3 screws.

  1. Connect the switch connector.


2. INSTALL FRONT SEAT CUSHION SHIELD LH

  1. B180700
    for Driver Side:
    Connect the lumbar switch connectors.

  1. Attach the 2 claws to install the cushion shield.

  1. Install the 3 screws.

  1. B180699
    Install the 2 screws.

  1. Connect the 2 rubber bands to the 2 hooks.


3. INSTALL RECLINING POWER SEAT SWITCH KNOB

B180734
  1. Attach the 2 claws to install the knob.


4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

B180735
  1. Attach the 2 claws to install the knob.


5. INSTALL FRONT SEAT ASSEMBLY LH
  1. Install the front seat assembly (Click here).

← INSPECTION (from Sep 2011)INSTALLATION (from Jan 2012) →