2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedures for LHD and RHD vehicles.
  2. The procedures listed below are for LHD vehicles.


1. INSTALL SEAT HEATER SWITCH

B181869
  1. Attach the 2 claws to install the heater switch.


2. INSTALL SUSPENSION CONTROL SWITCH

  1. B181868
    Attach the 4 claws to install the control switch.

  1. B181867
    Connect the 2 connectors.

  1. Attach the wire harness clamp.


3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. B180011
    Connect the connectors.

  1. Attach the 14 claws to install the console panel.


4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

  1. B180010
    Attach the 4 claws to install the box.


5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. B180009
    Attach the 9 claws to install the panel.


6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

  1. B180006
    Connect the connectors.

  1. Attach the 7 claws to install the panel.


7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

  1. Install the shift lever knob and twist it in the direction indicated by the arrow.

    B186291E01


8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

  1. B180005
    Attach the 7 claws to install the panel pad.

  1. Install the screw.

  1. Install the clip.


9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

  1. B182501
    Attach the 7 claws to install the panel cushion.


10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  1. B181910
    Connect the connectors and 2 clamps.

  1. Attach the 8 claws to install the panel pad.

  1. Install the screw.

  1. Install the clip.


11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  1. E155134
    Attach the 7 claws to install the panel cushion.

← INSPECTION (from Sep 2011)COMPONENTS (from Jan 2012) →