INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH |
![]() ![]() |
Install the belt with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the seat.
| 2. INSTALL REAR NO. 1 SEAT RECLINING COVER LH |
![]() ![]() |
Attach the 4 claws to install the cover.
Install the 2 screws.
| 3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
Install the rear No. 1 seat assembly (Click here).



