2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the LHD and RHD.
  2. The procedure listed below is for the LHD.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

B184528E01
  1. Install the belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.


2. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

B181166
  1. Attach the 4 claws to install the cover.

  1. Install the 2 screws.


3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
  1. Install the rear No. 1 seat assembly (Click here).

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →