2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
  1. Remove the rear No. 2 seat assembly LH (Click here).


2. REMOVE SEAT ADJUSTER BOLT COVER

B181818E02
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


3. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

B181819
  1. Remove the screw and release handle.


4. REMOVE RECLINING ADJUSTER COVER LH

B181820E01
  1. Remove the screw.

  1. Detach the 3 claws in the order shown in the illustration, and then remove the cover.


5. REMOVE RECLINING ADJUSTER COVER RH

B181821E01
  1. Remove the screw.

  1. Detach the 5 claws in the order shown in the illustration, and then remove the cover.


6. REMOVE REAR SEAT REAR BRACKET COVER REAR
  1. Detach the 2 claws and cover.


7. REMOVE REAR NO. 3 SEAT LEG COVER LH

  1. B181822
    Using a screwdriver, remove the spring of the seat stay ball-joint.

  1. Disconnect the seat stay.

  1. B181823
    Remove the 2 screws and cover.


8. REMOVE NO. 2 SEAT LEG COVER NO. 2

  1. B182643
    Remove the screw and seat leg cover.


9. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

B181825
  1. Remove the bolt, nut and seat link.


10. REMOVE REAR SEAT CUSHION UNDER COVER LH

  1. B181827
    Detach the 16 claws.

  1. B258453
    Remove the 7 screws and cover.


11. REMOVE NO. 3 SEAT FRONT BRACKET COVER LH

B181829
  1. Detach the 4 claws and remove the cover.


12. REMOVE NO. 3 SEAT LEG COVER NO. 2

B181830
  1. Remove the 2 screws.

  1. Detach the 4 claws and remove the cover.


13. REMOVE REAR SEAT INNER BELT SUB-ASSEMBLY

B180631E01
  1. Remove the nut and belt.

    HINT:
    The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, it becomes disconnected when the nut is removed.


14. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

B185871
  1. Remove the belt.

← COMPONENTS (from Sep 2011)INSTALLATION (from Sep 2011) →