INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL CLUTCH SWITCH ASSEMBLY |
Install the clutch switch assembly and tighten the adjusting nut.

- Torque:
- 16 N*m{ 163 kgf*cm , 12 ft.*lbf }
Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

- Torque:
- 16 N*m{ 163 kgf*cm , 12 ft.*lbf }
- NOTICE:
- After adjusting the pedal free play, perform the clutch switch assembly adjustment (Click here).
| 2. INSTALL CLUTCH PEDAL BRACKET SUB-ASSEMBLY |
Install the clutch pedal bracket sub-assembly (Click here).
