2011-2013 Land Cruiser · Service Manual Vehicle Interior

REPLACEMENT

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE TRANSMITTER BATTERY

NOTICE:
Take extra care when handling these precision electronic components.

  1. Push (for type A, for type B) or slide (for type C) the release hook knob and extract the emergency key.

    B300503E01

    Text in Illustration 
    *A
    for Type A, for Type B
    *B
    for Type C

  1. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

    NOTICE:
    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.


    B300504E01
    Text in Illustration 
    *A
    for Type A, for Type B
    *B
    for Type C
    *1
    Protective Tape
    -
    -

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the battery.

    B300505E01

    Text in Illustration 
    *A
    for Type A (lithium battery: CR1632)
    *B
    for Type B (lithium battery: CR1632)
    *C
    for Type C (lithium battery: CR2032)
    -
    -

    NOTICE:
    1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.
    2. Do not push the terminals with your finger.
    3. Do not forcibly pry up the battery. The terminals may be damaged.
    4. Do not touch the battery with wet hands. Water may cause rust.
    5. Do not touch or move any components inside the transmitter. It may interfere with proper operation.


2. INSTALL TRANSMITTER BATTERY

  1. Install a new battery with the positive (+) side facing upward as shown in the illustration.

    B300508E01

    Text in Illustration 
    *A
    for Type A (lithium battery: CR1632)
    *B
    for Type B (lithium battery: CR1632)
    *C
    for Type C (lithium battery: CR2032)
    -
    -

    NOTICE:
    1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.
    2. Do not bend the transmitter battery electrode during insertion.
    3. Keep the transmitter cover interior free of dust and oil.

  1. Install the transmitter housing cover by pressing down on it as shown in the illustration.

    B300730E01

    Text in Illustration 
    *A
    for Type A, for Type B
    *B
    for Type C

  1. Insert the mechanical key into the transmitter.

    B300731E01

    Text in Illustration 
    *A
    for Type A, for Type B
    *B
    for Type C

  1. Press one of the transmitter switches and check that the LED illuminates.

← REPLACEMENT (Sep 2011 – Dec 2011)REPLACEMENT (from Sep 2011) →