2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedures for LHD and RHD vehicles.
  2. The procedures listed below are for LHD vehicles.


1. INSTALL POWER OUTLET SOCKET COVER NO.2

  1. B178637
    Attach the 2 claws to install the socket cover.


2. INSTALL POWER OUTLET SOCKET ASSEMBLY

  1. B110252
    Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.


3. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

B292996
  1. Connect the connectors.

  1. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.


4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

B180005
  1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.


5. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

B182501
  1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.


6. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

B292995
  1. Connect the connectors and attach the 2 clamps.

  1. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.


7. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

B292997
  1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.

← REMOVAL (from Sep 2011)COMPONENTS (from Sep 2011) →