INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
- Use the same procedures for LHD and RHD vehicles.
| 1. INSTALL CIGARETTE LIGHTER BEZEL STAY |
Attach the 2 claws to install the bezel stay.

| 2. INSTALL CIGARETTE LIGHTER ASSEMBLY |
Attach the claw to install the cigarette lighter socket and retainer assembly.

Install the cigarette lighter knob and element assembly.
| 3. INSTALL CIGARETTE LIGHTER COVER |
Attach the 2 claws to install the cover.

| 4. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() ![]() |
Connect the connectors.
Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.
| 5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
![]() ![]() |
Attach the 7 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
| 6. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
![]() ![]() |
Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.
| 7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
![]() ![]() |
Connect the connectors and attach the 2 clamps.
Attach the 8 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
| 8. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
![]() ![]() |
Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.





