REASSEMBLY
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1.
INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD) |
 |
Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.


| 2.
INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD) |
 |
Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.


| 3.
INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)
|
 |
for LHD:
Attach the 7 clamps to install the antenna cord.


for RHD:
Attach the 5 clamps to install the antenna cord.


| 4.
INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)
|
 |
for LHD:
Attach the 8 clamps to install the antenna cord.


for RHD:
Attach the 6 clamps to install the antenna cord.


| 5.
INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)
|
 |
Install the antenna with the 2 screws.
Attach the 2 clamps.
| 6.
INSTALL NO. 2 SIDE DEFROSTER NOZZLE |
 |
- Attach the 3 claws to install the No. 2 side defroster nozzle.
| 7.
INSTALL NO. 1 SIDE DEFROSTER NOZZLE |
 |
- Attach the 2 claws to install the No. 1 side defroster nozzle.
| 8.
INSTALL DEFROSTER NOZZLE ASSEMBLY |
 |
- Attach the 11 claws to install the defroster nozzle.
| 9.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
|
 |
- Attach the 5 hooks (A).
Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.
- Install the 2 screws.
- Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Attach the claw and install the wire.
| 10.
INSTALL REAR NO. 1 AIR DUCT (w/ Rear Air Duct) |
 |
- Install the rear No. 1 air duct with the 2 screws.
| 11.
INSTALL CENTER HEATER TO REGISTER DUCT |
 |
- Install the center heater to register duct with the 3 screws.