2011-2013 Land Cruiser · Service Manual Vehicle Interior

REASSEMBLY

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD)

  1. Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

    B180536


2. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD)

  1. Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

    B190100


3. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

  1. for LHD:
    Attach the 7 clamps to install the antenna cord.

    B181730

  1. for RHD:
    Attach the 5 clamps to install the antenna cord.

    B181732


4. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

  1. for LHD:
    Attach the 8 clamps to install the antenna cord.

    B181729

  1. for RHD:
    Attach the 6 clamps to install the antenna cord.

    B181731


5. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)
  1. for LHD:

    1. Install the navigation antenna assembly with the 2 screws.

    2. Attach the 2 clamps.

  1. for RHD:

    1. Install the navigation antenna assembly with the 2 screws.

    2. Attach the 2 clamps.


6. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

  1. B180543
    Attach the 3 claws to install the No. 2 side defroster nozzle.


7. INSTALL NO. 1 SIDE DEFROSTER NOZZLE

  1. B180541
    Attach the 2 claws to install the No. 1 side defroster nozzle.


8. INSTALL DEFROSTER NOZZLE ASSEMBLY

  1. B180544
    Attach the 11 claws to install the defroster nozzle.


9. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

  1. B189612E01
    Attach the 5 hooks (A).

  1. Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.

  1. B189610E01
    Install the 2 screws.

  1. B183441
    Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Attach the claw and install the wire.


10. INSTALL REAR NO. 1 AIR DUCT (w/ Rear Air Duct)

  1. B180539
    Install the rear No. 1 air duct with the 2 screws.


11. INSTALL CENTER HEATER TO REGISTER DUCT

  1. B180538
    Install the center heater to register duct with the 3 screws.

← REASSEMBLY (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →