2011-2013 Land Cruiser · Service Manual Steering

REASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

C172655
  1. Install the ECU with the 2 screws.

    Torque:
    1.5 N*m{ 15 kgf*cm , 13 in.*lbf }

  1. Connect the 2 connectors.

    NOTICE:
    The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.


2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

C147319
  1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

  1. Tighten the 2 tapered-head bolts until the bolt heads break off.

← INSPECTION (from Sep 2011)INSTALLATION (Sep 2011 – Dec 2011) →