REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. REMOVE FUEL TANK SUB-ASSEMBLY |
| 2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
Set SST on the retainer.

- SST
- 09808-14030
- HINT:
- Securely attach the claws of SST to the protrusion of the retainer and fix SST in place.
- Install SST while pressing the claws of SST against the retainer (towards the center of SST).
- Securely attach the claws of SST to the protrusion of the retainer and fix SST in place.
Using SST, loosen the retainer.

- SST
- 09808-14030
Text in Illustration 

Turn
- NOTICE:
- Do not use any tools other than those specified in this operation. Damage to the retainer or the fuel tank may result.
- While pressing down on SST so that the claws of SST do not slip off the protrusion of the retainer, turn the retainer counterclockwise to loosen it.
- Do not use any tools other than those specified in this operation. Damage to the retainer or the fuel tank may result.
- HINT:
- The protrusion of the retainer fit in the ends of SST.
Remove the retainer.
Remove the retainer while holding the fuel suction tube assembly by hand.
- NOTICE:
- Be careful not to bend the arm of the fuel sender gauge.
Remove the gasket from the fuel tank.
