2011-2013 Land Cruiser · Service Manual Suspension

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE HEIGHT CONTROL HOSE ASSEMBLY

  1. C176107E01
    Disconnect the clamp from the reservoir, then remove the 2 clips and hose.


2. REMOVE HEIGHT CONTROL CAP TO RESERVOIR HOSE

  1. C176842E01
    Remove the 3 clips, 2 breather plugs, and hose from the reservoir hose.

  1. C175801
    Pull the connector down to detach it and remove the hose from the reservoir tank.


3. DISCONNECT NO. 4 FRAME WIRE

  1. C176101E01
    Disconnect the 2 connectors, clamp and frame wire.


4. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY

  1. C176759
    Remove the 3 nuts and bracket from the pump and motor.


5. REMOVE HEIGHT CONTROL RESERVOIR ASSEMBLY

  1. C176195
    Using a 5 mm hexagon wrench, remove the 5 bolts and reservoir from the pump and motor.


6. REMOVE NO. 1 HEIGHT CONTROL BOLT CUSHION
  1. Remove the 3 bolt holders and 3 bolt cushions from the pump and motor.

← REMOVAL (from Sep 2011)INSPECTION (from Sep 2011) →