INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT HEIGHT CONTROL PUMP AND MOTOR |
Check the pump and motor operation.

Apply battery voltage to the pump and motor and check the operating sound of the height control pump and motor.
- NOTICE:
- Be careful of fluid spray when the height control pump and motor is operated.
- Do not allow the motor to operate for 60 seconds or more.
- If the height control pump and motor is shorted, locked, or has a similar type of malfunction, a large amount of current will be flowing. Therefore, if the motor does not operate, immediately stop this inspection.
- Be careful of fluid spray when the height control pump and motor is operated.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Motor operates
- If the result is not as specified, replace the height control pump and motor.
