DISPOSAL
Removal / installation · Vehicles built from Sep 2011
| 1. DISPOSE OF REAR SUSPENSION CONTROL ACCUMULATOR |
![]() ![]() |
Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.
- CAUTION:
- The gas is colorless, odorless and harmless.
- Saw a hole while covering the saw with a cloth because chips may fly up.
- The gas is colorless, odorless and harmless.
| 2. DISPOSE OF REAR NO. 3 SUSPENSION CONTROL ACCUMULATOR |
![]() ![]() |
Place the gas camber in a vise and saw a hole in the hatched area shown in the illustration using a saw to discharge the gas inside.
- CAUTION:
- The gas is colorless, odorless and harmless.
- Saw a hole while covering the saw with a cloth because chips may fly up.
- The gas is colorless, odorless and harmless.



