2011-2013 Land Cruiser · Service Manual Suspension

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT FRONT SHOCK ABSORBER CONTROL VALVE ASSEMBLY

  1. C173967E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for RH 
    Tester Connection
    Condition
    Specified Condition
    1 (FAR+) - 2 (E FR)
    Always
    12.0 to 13.6 Ω
    3 (FBR-) - 2 (E FR)
    4 (FAR-) - 2 (E FR)
    5 (FBR+) - 2 (E FR)
    for LH 
    Tester Connection
    Condition
    Specified Condition
    1 (FAL+) - 2 (E FL)
    Always
    12.0 to 13.6 Ω
    3 (FBL-) - 2 (E FL)
    4 (FAL-) - 2 (E FL)
    5 (FBL+) - 2 (E FL)

    1. If the result is not as specified, replace the shock absorber control valve.


INSPECT FRONT SUSPENSION CONTROL VALVE ASSEMBLY

  1. C175619E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for RH 
    Tester Connection
    Condition
    Specified Condition
    1 (CRFR) - 2 (SLB)
    20°C (68°F)
    4.58 to 5.02 Ω
    for LH 
    Tester Connection
    Condition
    Specified Condition
    1 (CRFL) - 2 (SLB)
    20°C (68°F)
    4.58 to 5.02 Ω

    1. If the result is not as specified, replace the shock absorber control valve.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →