2011-2013 Land Cruiser · Service Manual Suspension

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR SHOCK ABSORBER CONTROL VALVE ASSEMBLY

C173967E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for RH 
    Tester Connection
    Condition
    Specified Condition
    1 (RAR+) - 2 (E RR)
    Always
    12.0 to 13.6 Ω
    3 (RBR-) - 2 (E RR)
    4 (RAR-) - 2 (E RR)
    5 (RBR+) - 2 (E RR)
    for LH 
    Tester Connection
    Condition
    Specified Condition
    1 (RAL+) - 2 (E RL)
    Always
    12.0 to 13.6 Ω
    3 (RBL-) - 2 (E RL)
    4 (RAL-) - 2 (E RL)
    5 (RBL+) - 2 (E RL)

    1. If the result is not as specified, replace the shock absorber control valve.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →