2011-2013 Land Cruiser · Service Manual Suspension

INSPECTION

Inspection · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


INSPECT SUSPENSION CONTROL SWITCH

  1. C175598E20
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Damping Force Control Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    14 (ECU2) - 20 (E)
    COMF
    Below 1 Ω
    Except COMF
    10 kΩ or higher
    15 (ECU1) - 20 (E)
    SPORT
    Below 1 Ω
    Except SPORT
    10 kΩ or higher
    Height Control Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    6 (LO) - 20 (E)
    Down button of height control switch is pushed.
    Below 1 Ω
    Height control switch is not pushed or up button is pushed.
    10 kΩ or higher
    7 (HI) - 20 (E)
    Up button of height control switch is pushed.
    Below 1 Ω
    Height control switch is not pushed or down button is pushed.
    10 kΩ or higher
    Height Control OFF Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    5 (N) - 20 (E)
    Height control OFF switch is pushed.
    Below 1 Ω
    Height control OFF switch is not pushed.
    10 kΩ or higher

    If the result is not as specified, replace the suspension control switch.

← REMOVAL (from Sep 2011)INSPECTION (from Jan 2012) →