INSPECTION
Inspection · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| INSPECT SUSPENSION CONTROL SWITCH |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Damping Force Control Switch Tester Connection
Switch Condition
Specified Condition
5 (ECU2) - 16 (E)
COMF
Below 1 Ω
Except COMF
10 kΩ or higher
6 (ECU1) - 16 (E)
SPORT
Below 1 Ω
Except SPORT
10 kΩ or higher
Height Control Switch Tester Connection
Switch Condition
Specified Condition
8 (LO) - 16 (E)
Down button of height control switch is pushed.
Below 1 Ω
Height control switch is not pushed or up button is pushed.
10 kΩ or higher
7 (HI) - 16 (E)
Up button of height control switch is pushed.
Below 1 Ω
Height control switch is not pushed or down button is pushed.
10 kΩ or higher
Height Control OFF Switch Tester Connection
Switch Condition
Specified Condition
9 (N) - 16 (E)
Height control OFF switch is pushed.
Below 1 Ω
Height control OFF switch is not pushed.
10 kΩ or higher
