ON-VEHICLE INSPECTION
Inspection · Vehicles built from Sep 2011
| REMOVE DEICER RELAY |
Remove the deicer relay from the engine room relay block.
| INSPECT DEICER RELAY |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Battery voltage is not applied to terminals 1 and 2
10 kΩ or higher
3 - 5
Battery voltage is applied to terminals 1 and 2
Below 1 Ω
| INSTALL DEICER RELAY |
Install the deicer relay to the engine room relay block.


