2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL NO. 2 RADIO BRACKET
  1. Install the No. 2 radio bracket with the 3 bolts.

    Torque:
    3.0 N*m{ 30 kgf*cm , 26 in.*lbf }


2. INSTALL NO. 1 RADIO BRACKET
  1. Install the No. 1 radio bracket with the 3 bolts.

    Torque:
    3.0 N*m{ 30 kgf*cm , 26 in.*lbf }


3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET
  1. Connect the connectors.

  1. E249495
    Insert the multi-media module receiver assembly to attach the 5 claws on its backside.

    NOTICE:
    When inserting the multi-media module receiver assembly, do not press the knobs on it.

  1. E247523E01
    Install the multi-media module receiver assembly with the 2 screws and 2 bolts.

    Torque:
    Bolt A:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }


4. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET
  1. Connect the connectors.

  1. E249496
    Insert the multi-display assembly and attach the 2 clips and 6 claws on its backside.

    NOTICE:
    When inserting the multi-display assembly, do not press the knobs on it.

  1. E247526E01
    Install the multi-display assembly with the 2 screws and 2 bolts.

    Torque:
    Bolt A:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }


5. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

B182866
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 4 instrument panel register.


6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

B182547
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 3 instrument panel register.


7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

B183763
  1. Attach the 8 claws to install the opening cover.


8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

B292996
  1. Connect the connectors.

  1. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.


9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

B180005
  1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.


10. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

B182501
  1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.


11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

B292995
  1. Connect the connectors and attach the 2 clamps.

  1. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.


12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

B292997
  1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.


13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →