2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

  1. E155869
    Attach the 2 claws to install the hazard warning switch.


2. INSTALL CLOCK ASSEMBLY

  1. B179753
    Install the clock with the 2 screws.


3. INSTALL NO. 1 RADIO BRACKET

  1. B181485
    Install the bracket with the 3 bolts.

    Torque:
    3.0 N*m{ 30 kgf*cm , 26 in.*lbf }


4. INSTALL NO. 2 RADIO BRACKET

  1. B181486
    Install the bracket with the 3 bolts.

    Torque:
    3.0 N*m{ 30 kgf*cm , 26 in.*lbf }


5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. Connect the connectors.

  1. B181487
    Insert the radio receiver to attach the 10 claws on its backside.

    NOTICE:
    When inserting the radio receiver, do not press the knobs on it.

  1. B181484
    Install the radio receiver with the 2 screws and 2 bolts.

    Torque:
    Bolt:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }


6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

B182866
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 4 instrument panel register.


7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

B182547
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 3 instrument panel register.


8. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

B183763
  1. Attach the 8 claws to install the opening cover.


9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →