2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT FUEL SENDER GAUGE ASSEMBLY

A174986E02
  1. Check that the float moves smoothly between F and E.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 3
    Float level is F (upper)
    12 to 18 Ω
    Float level is E (lower)
    405 to 415 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Fuel Sender Gauge)
    *b
    F (Upper)
    *c
    E (Lower)
    If the result is not as specified, replace the fuel sender gauge assembly.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →