2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  1. Disconnect the cables from the negative (-) main battery and sub-battery terminals.


2. REMOVE INJECTOR DRIVER

  1. A175105
    Disconnect the 4 injector driver connectors.

  1. A175106
    Detach the fuel hose clamp and wire harness clamp.

  1. Remove the 3 bolts and injector driver assembly.

  1. A174981E01
    Remove the 2 bolts, No. 2 injector driver and No. 2 injector driver bracket from the No. 1 injector driver bracket.

  1. A174982
    Remove the 4 screws, No. 1 injector driver bracket, No. 1 injector driver and injector driver bracket.

  1. A174983
    Remove the 4 screws, No. 2 injector driver bracket, No. 2 injector driver and injector driver bracket.

← COMPONENTS (from Jan 2012)REMOVAL (from Jan 2012) →