2011-2013 Land Cruiser · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE DIFFERENTIAL PROTECTOR ASSEMBLY

  1. C174228
    Detach the 2 connector clamps and wire harness clamp.

  1. Remove the bolt, nut and protector.


2. REMOVE REAR DIFFERENTIAL LOCK ACTUATOR PROTECTOR

  1. C174229
    Remove the 2 nuts and protector.


3. REMOVE REAR DIFFERENTIAL LOCK COVER WITH POSITION SWITCH

  1. C179874
    Remove the 3 bolts and differential lock cover with position switch.

  1. Using a brass bar and hammer, tap on the cover to remove it.


4. REMOVE DIFFERENTIAL LOCK SHIFT ACTUATOR

  1. C161874
    Remove the shift fork shaft bolt.

  1. C161873
    Remove the 4 bolts and differential lock shift actuator.

  1. Using a screwdriver, pull out the actuator and remove the sleeve and shift fork.

← COMPONENTS (from Sep 2011)INSPECTION (from Sep 2011) →