2011-2013 Land Cruiser · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR DIFFERENTIAL LOCK POSITION SWITCH (NO. 1 TRANSFER INDICATOR SWITCH)

  1. Measure the resistance according to the value(s) in the table below.

    C177818E01

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    2 (+B) - 1 (GND)
    Pushed
    Below 1 Ω
    Not pushed
    100 kΩ or higher

    If the result is not as specified, replace the rear differential lock position switch.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →