2011-2013 Land Cruiser · Service Manual Steering

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT STEERING COLUMN ASSEMBLY (w/ Entry and Start System)

  1. C172658E01
    Measure the length of the steering main shaft.

    Standard length:
    573 mm (1.88 ft.)


INSPECT STEERING COLUMN ASSEMBLY (w/o Entry and Start System)

  1. Inspect the collar.

    1. C244198E03
      Check that the 2 collars are securely installed to the steering column assembly.
      If the bushings are missing or damaged, replace the steering column assembly with a new one.

    2. Check the 2 bushings for deformation and damage.
      If the bushings are deformed or damaged, replace the steering column assembly with a new one.

  1. Inspect the capsules.

    1. C245671E01
      Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

      Standard Dimension (A):
      10 mm (0.394 in.)

      If the capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.

    2. Check the 2 capsules for deformation and damage.
      If the capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.

← DISASSEMBLY (from Sep 2011)REASSEMBLY (from Sep 2011) →