2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
  1. Remove the tonneau cover.


3. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

HINT:
Use the same procedures described for the LH side (Click here).


4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

HINT:
Use the same procedures described for the LH side (Click here).


5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

B181672
  1. Detach the 6 clips and remove the support plate.


6. REMOVE REAR STEP COVER

B181673

HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.


7. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedures described for the LH side.


8. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

B190187E01

HINT:
Use the same procedure to remove the rear seat cover cap on the other side.

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


9. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

B186439

HINT:
Use the same procedure to remove the tonneau cover holder cap on the other side.

  1. Detach the 2 claws and remove the tonneau cover holder cap.


10. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

B182645

HINT:
When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.

  1. B181688
    Detach the 3 claws and remove the cover.

  1. B181690
    Remove the bolt and rear No. 1 seat belt anchor.

  1. B181692
    w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Detach the 3 claws and remove the cover.

    2. B181693
      Remove the bolt and rear No. 2 seat belt anchor.

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 16 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.

    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.

      B186890

  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.

    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.

      B190220

  1. w/ Tonneau Cover:

    1. Remove the screw and clip.

    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.

      B186438


11. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY

  1. B181527
    Disconnect the connector.

  1. Remove the 5 bolts and box speaker.

← COMPONENTS (from Sep 2011)REMOVAL (from Jan 2012) →