REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY
|
 |
- HINT:
- Use the same procedure to remove the front assist grip on the other side.
Detach the 4 claws and remove the 2 assist grip plugs.
- Remove the 2 bolts.
Detach the 2 claws and remove the front assist grip.
| 3.
REMOVE FRONT PILLAR GARNISH LH
|
 |
Detach the clip and 3 guides, and remove the front pillar garnish.
for 9, 14 Speakers:
Disconnect the speaker connector and then remove the front pillar garnish.
- Protect the curtain shield airbag.
Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.
- NOTICE:
- Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
| 4.
REMOVE FRONT NO. 3 SPEAKER ASSEMBLY |
 |
- Detach the 3 claws and remove the speaker.