2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

B181684

HINT:
Use the same procedure to remove the front assist grip on the other side.

  1. Detach the 4 claws and remove the 2 assist grip plugs.

  1. B181685
    Remove the 2 bolts.

  1. Detach the 2 claws and remove the front assist grip.


4. REMOVE FRONT PILLAR GARNISH LH

B185447
  1. Detach the clip and 3 guides, and remove the front pillar garnish.

  1. for 9, 14 Speakers:
    Disconnect the speaker connector and then remove the front pillar garnish.

  1. B181704E01
    Protect the curtain shield airbag.

    1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

      NOTICE:
      Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.


5. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY

  1. B181525
    Detach the 3 claws and remove the speaker.

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (from Sep 2011) →