2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

  1. for LHD:
    Attach the 7 clamps to install the antenna cord.

    B181730

  1. for RHD:
    Attach the 5 clamps to install the antenna cord.

    B181732


2. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

  1. for LHD:
    Attach the 8 clamps to install the antenna cord.

    B181729

  1. for RHD:
    Attach the 6 clamps to install the antenna cord.

    B181731


3. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
  1. Install the instrument panel safety pad (Click here).


4. INSTALL ANTENNA CORD SUB-ASSEMBLY

  1. w/o Sliding Roof:

    1. Apply new double-sided tape as shown in the illustration.

      HINT:
      Attach double-sided tape to the hatched areas shown in the illustration below.


      B188592E01

    2. Align the red tape wound around the antenna cord with the V markings on the roof headlining and the notch at the rear of the headlining, and attach the antenna cord to the double-sided tape.

    3. Attach the 2 clamps and fit the antenna into the notch.

  1. w/ Sliding Roof:

    1. Apply new double-sided tape as shown in the illustration.

      HINT:
      Attach double-sided tape to the hatched areas shown in the illustration below.
      B184459E02

    2. Align the red tape wound around the antenna cord with the V markings on the roof headlining and the notch at the rear of the headlining, and attach the antenna cord to the double-sided tape.

    3. Attach the 4 clamps and fit the antenna into the notch.


5. INSTALL ROOF HEADLINING ASSEMBLY
  1. w/o Sliding Roof:
    Install the roof headlining (Click here).

  1. w/ Sliding Roof:
    Install the roof headlining (Click here).


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


7. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →