REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE ROOF HEADLINING ASSEMBLY |
w/o Sliding Roof:
Remove the roof headlining assembly (Click here).
w/ Sliding Roof:
Remove the roof headlining assembly (Click here).
| 3. REMOVE ANTENNA CORD SUB-ASSEMBLY |
w/o Sliding Roof:
Detach the 2 clamps and remove the antenna from the notch on the rear of the roof headlining.


Remove the antenna cord from the roof headlining.
Remove the double-sided tape from the roof headlining.
w/ Sliding Roof:
Detach the 4 clamps and remove the antenna from the notch on the rear of the roof headlining.


Remove the antenna cord from the roof headlining.
Remove the double-sided tape from the roof headlining.
| 4. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
Remove the instrument panel safety pad (Click here).
| 5. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display) |
for LHD:
Detach the 8 clamps and remove the antenna cord.

for RHD:
Detach the 6 clamps and remove the antenna cord.

| 6. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display) |
for LHD:
Detach the 7 clamps and remove the antenna cord.

for RHD:
Detach the 5 clamps and remove the antenna cord.

