REASSEMBLY
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL NO. 2 COOLER EVAPORATOR SUB-ASSEMBLY |
 |
- Install the evaporator.
| 2.
INSTALL NO. 1 COOLER BLOWER MOTOR SUB-ASSEMBLY |
 |
- Attach the 4 claws to install the blower motor.
Install the 2 screws.
| 3.
INSTALL NO. 3 COOLER THERMISTOR |
 |
- Install the thermistor.
- Install a new cool box insulator, as shown in the illustration.
| 4.
INSTALL UPPER COOLING UNIT CASE |
 |
- Attach the 2 hooks and close the case, as shown in the illustration.
- Install the cooling unit case.
| 5.
INSTALL LOWER COOLING UNIT CASE SUB-ASSEMBLY |
 |
Install the lower cooling unit case with the 4 holding springs.
Connect the 3 connectors.
Install the screw.
| 6.
INSTALL LIQUID HOSE |
 |
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the cooler evaporator.
- Compressor oil:
- ND-OIL 8 or equivalent
Install the O-ring on the liquid hose.
Install the liquid hose to the evaporator with the bolt.
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 7.
INSTALL COOLING UNIT CASE SUB-ASSEMBLY |
 |
- Install the air duct to the case with the 2 screws.
| 8.
INSTALL COOLING BOX BASE |
 |
- Install the cooling box base with the 10 screws.
| 9.
INSTALL COOLING BOX BRACKET |
 |
- Install the bracket with the 2 screws.
- Install the mounting bracket with the 2 screws.
| 10.
INSTALL NO. 2 COOLING BOX BRACKET |
 |
- Install the bracket with the 2 screws.
- Install the mounting bracket with the 2 screws.
| 11.
INSTALL COOLER CONTROL SWITCH SUB-ASSEMBLY |
 |
- Connect the connector.
Attach the 2 claws to install the switch.
| 12.
INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY |
 |
- Install the amplifier with the screw.
Connect the connector.
| 13.
INSTALL COOLING BOX ASSEMBLY |
 |
- Attach the 10 claws to install the cooling box.
Install the 4 screws.
| 14.
INSTALL CONSOLE COMPARTMENT DOOR LOCK |
 |
- Install the door lock with the 2 screws.
| 15.
INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY |
 |
- Install the door hinge with the 4 screws.
- Attach the 12 claws to install the inner door.
| 16.
INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY |
 |
- Install the door lock. Then install the lower box with the 12 screws.
| 17.
INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY |
 |
- Install the door with the 6 screws.
| 18.
INSTALL REAR CONSOLE BOX MOUNTING BRACKET |
 |
- Install the bracket with the 4 bolts.
| 19.
INSTALL INSTRUMENT PANEL HOLE COVER |
 |
- Attach the 7 claws to install the hole cover.
Install the 2 screws.
| 20.
INSTALL REAR COOLER SWITCH HOLE COVER (w/o Rear Cooler) |
 |
- Attach the 5 claws.
Install the hole cover with the 4 screws.
| 21.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Cooler)
|
 |
Attach the 5 claws to install the air conditioning control.
Install the 4 screws.
| 22.
INSTALL NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System)
|
 |
Attach the 5 claws to install the air conditioning control.
Install the 4 screws.