2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT BUMPER COVER
(Click here)

4. REMOVE FRONT FENDER MAIN SEAL LH

  1. B181061
    Using a clip remover, detach the 3 clips and remove the fender main seal.


5. REMOVE HEADLIGHT ASSEMBLY LH

  1. E244764E01
    Put protective tape around the headlight assembly LH.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the 4 bolts.

  1. Disconnect the connectors and headlight assembly LH.

← REMOVAL (Sep 2011 – Dec 2011)DISASSEMBLY (Sep 2011 – Dec 2011) →