2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL DISCHARGE HEADLIGHT BULB

  1. E156929
    Lock the set spring as shown in the illustration to install the discharge headlight bulb.

    NOTICE:
    Do not touch the glass part of the bulb.

  1. E156930
    Turn the headlight control ECU socket in the direction indicated by the arrow to connect the socket.

  1. E156931
    Turn the back cover in the direction indicated by the arrow to install it.


2. INSTALL BATTERY
  1. Install the battery.

  1. Install the stay and nut.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →