2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)
  1. Remove the roof headlining (Click here).


2. REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)
  1. Remove the roof headlining (Click here).


3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY (w/ Rear No. 2 Seat)

  1. B181625
    Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Remove the 13 bolts and curtain shield airbag.


4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY (w/o Rear No. 2 Seat)

  1. Disconnect the connector.

    B183757

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Remove the 10 bolts and curtain shield airbag.

← ON-VEHICLE INSPECTION (from Jan 2012)REMOVAL (from Jan 2012) →