2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012


1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
  1. Install the rear height control sensor sub-assembly LH with the 2 bolts and nut.

    Torque:
    for bolt:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }
    for nut:
    5.6 N*m{ 57 kgf*cm , 50 in.*lbf }

  1. Connect the connector and 2 clamps.

← INSPECTION (from Jan 2012)COMPONENTS (from Jan 2012) →