REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE REAR WHEEL |
| 3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH |
Disconnect the connector and 2 clamps.

Remove the 2 bolts, nut and sensor.

| 4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH |
Disconnect the connector and 2 clamps.

Remove the 2 bolts, nut and sensor.

