2011-2013 Land Cruiser · Service Manual Vehicle Interior

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Warning 
    Display (Item)
    Default
    Contents
    Setting
    Driver Side Seatbelt Warning Buzzer
    ON
    To change the seat-belt warning buzzer.
    ON / OFF
    Front Passenger Side Seatbelt Warning Buzzer
    ON
    To change the seat-belt warning buzzer.
    ON / OFF
    Unit Conversion  
    Display (Item)
    Default
    Contents
    Setting
    Units By Region
    Different for each vehicle
    To change the units of the display.
    Km/l JP / Km/l / Ml/g US / Ml/g UK
    Display 
    Display (Item)
    Default
    Contents
    Setting
    Eco Drive Indicator Zone
    ON
    To change the eco driving indicator zone display.
    ON / OFF
    Language
    None
    To change the language of the display.
    Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd

← CUSTOMIZE PARAMETERS (Sep 2011 – Dec 2011)INITIALIZATION (Sep 2011 – Dec 2011) →