CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the Intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Warning Display (Item)
Default
Contents
Setting
Driver Side Seatbelt Warning Buzzer
ON
To change the seat-belt warning buzzer.
ON / OFF
Front Passenger Side Seatbelt Warning Buzzer
ON
To change the seat-belt warning buzzer.
ON / OFF
Unit Conversion Display (Item)
Default
Contents
Setting
Units By Region
Different for each vehicle
To change the units of the display.
Km/l JP / Km/l / Ml/g US / Ml/g UK
Display Display (Item)
Default
Contents
Setting
Language
None
To change the language of the display.
Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd