INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL REAR NO. 2 SEAT BELT ASSEMBLY 3 POINT TYPE |
![]() ![]() |
Install the belt with the 2 bolts.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
Install the through-anchor with the bolt.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
| 2. INSTALL ROOF HEADLINING ASSEMBLY (w/o Sliding Roof) |
Install the roof headlining (Click here).
| 3. INSTALL ROOF HEADLINING ASSEMBLY (w/ Sliding Roof) |
Install the roof headlining (Click here).
| 4. INSTALL SEAT BELT ANCHOR COVER |
![]() ![]() |
Attach the 4 guides and 4 clips to install the seat belt anchor cover.


