2011-2013 Land Cruiser · Service Manual Brake

INSPECTION

Inspection · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK SUSPENSION CONTROL SWITCH (CRAWL SWITCH)

C177127E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (ECU1) - 20 (E)
    Speed selector switch: MID
    10 kΩ or higher
    Speed selector switch: HI
    Speed selector switch: LO
    Below 1 Ω
    4 (ECU2) - 20 (E)
    Speed selector switch: MID
    10 kΩ or higher
    Speed selector switch: HI
    Below 1 Ω
    Speed selector switch: LO
    2 (HSW) - 20 (E)
    ON/OFF switch: Pressed
    Below 1 Ω
    ON/OFF switch: Not pressed
    10 kΩ or higher

    If the result is not as specified, replace the suspension control switch (CRAWL switch).

← REMOVAL (from Jan 2012)INSPECTION (from Jan 2012) →