2011-2013 Land Cruiser · Service Manual Brake

INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK SUSPENSION CONTROL SWITCH (CRAWL SWITCH)

C253464E01
Text in Illustration 
*1
CRAWL ON/OFF Switch
*2
Turn Assist Function Switch
*3
CRAWL Speed Selector Switch
*a
Component without harness connected:
(CRAWL Switch)
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    18 (ECU1) - 16 (E)
    Speed selector switch: Medium
    10 kΩ or higher
    Speed selector switch: Medium-high
    Speed selector switch: High
    Speed selector switch: Low
    Below 1 Ω
    Speed selector switch: Medium-low
    19 (ECU2) - 16 (E)
    Speed selector switch: Medium-low
    10 kΩ or higher
    Speed selector switch: Medium
    Speed selector switch: Medium-high
    Speed selector switch: Low
    Below 1 Ω
    Speed selector switch: High
    13 (ECU3) - 16 (E)
    Speed selector switch: Low
    10 kΩ or higher
    Speed selector switch: Medium-low
    Speed selector switch: Medium
    Speed selector switch: Medium-high
    Below 1 Ω
    Speed selector switch: High
    14 (HSW) - 16 (E)
    ON/OFF switch: Pressed
    Below 1 Ω
    ON/OFF switch: Not pressed
    10 kΩ or higher
    2 (OTA) - 16 (E)
    Turn assist function switch: Pressed
    Below 1 Ω
    Turn assist function switch: Not pressed
    10 kΩ or higher

    If the result is not as specified, replace the suspension control switch (CRAWL switch).

← INSPECTION (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →